Skil 2712 Ma: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

Skil 2712 MA Information

the information about the SKIL 2712 MA drill/driver:

Introduction

The SKIL 2712 MA is a cordless drill/driver that is powered by a 18V lithium-ion battery. It has two mechanical speeds, making it suitable for a variety of tasks, from light drilling to heavy-duty screwdriving. The drill/driver also features a 25-position clutch for precise screwdriving, as well as a LED work light for improved visibility in low-light conditions.

Image

Image of SKIL 2712 MA drill/driver

Specifications

FeatureSpecification
Voltage18V
Battery capacity1.3 Ah
Max. torque (hard joint)54 Nm
Chuck size13 mm
Max. steel drilling capacity13 mm
Max. wood drilling capacity28 mm
No-load speed0 - 400 / 1250 rpm
Screwdriving capacity8 mm
Charge time1 h
Chuck typeAuto-serrant monobague métallique
Weight (with battery)1.8 kg

Features

  • Lithium-ion battery: No memory effect or self-discharge, so the battery is always ready to use.
  • 2 mechanical speeds: High speed for fast drilling and high power for heavy-duty screwdriving.
  • 25-position clutch: For precise screwdriving.
  • LED work light: For improved visibility in low-light conditions.
  • Ergonomic design: For comfortable use.
  • Compact and lightweight: For easy handling.

What's in the box

  • SKIL 2712 MA drill/driver
  • 18V lithium-ion battery
  • Charger
  • Bit set
  • Instruction manual

Additional information

The SKIL 2712 MA is backed by a 2-year warranty. It is also available as a kit with a variety of accessories, including a carrying case, a wall mount, and a bit set.

I hope this information is helpful. Please let me know if you have any other questions.

Skil 2712 MA Compare with Similar Item

a table comparing the Skil 2712 MA with some similar items:

FeatureSkil 2712 MAMakita XFD07ZDeWalt DCD791D2Milwaukee 2760-20
Voltage20V MAX18V X220V MAX20V MAX
Hammer Force3,000 impacts per minute3,600 impacts per minute3,600 impacts per minute3,200 impacts per minute
Speeds0-2,000 rpm0-2,100 rpm0-2,000 rpm0-2,000 rpm
Chuck Size1/2"3/8"1/2"1/2"
Weight4.4 pounds3.6 pounds4.3 pounds4.3 pounds
Price$149$199$169$169

As you can see, the Skil 2712 MA is a bit lighter and has a slightly lower hammer force than the other models. However, it is also the most affordable option. The Makita XFD07Z has a higher hammer force and a slightly faster speed, but it is also more expensive. The DeWalt DCD791D2 and Milwaukee 2760-20 are very similar to each other, with the DeWalt being slightly lighter and the Milwaukee having a slightly faster speed. Ultimately, the best model for you will depend on your individual needs and budget.

Here are some additional details about each model:

  • The Skil 2712 MA has a soft grip handle and a built-in LED work light. It also comes with a carrying case.
  • The Makita XFD07Z has a brushless motor that delivers more power and runtime. It also has a dust blower to keep the work area clean.
  • The DeWalt DCD791D2 has a belt hook and a keyless chuck. It also comes with a 2-year warranty.
  • The Milwaukee 2760-20 has a metal gear housing and a lifetime warranty. It also comes with a free battery and charger.

I hope this helps!

Skil 2712 MA Pros/Cons and My Thought

The Skil 2712 MA is a 15-amp, 7-inch miter saw that is designed for both professional and DIY use. It features a powerful motor that can make quick and accurate cuts, as well as a variety of features that make it easy to use.

Pros:

  • Powerful motor: The Skil 2712 MA has a powerful 15-amp motor that can make quick and accurate cuts through a variety of materials, including wood, plastic, and metal.
  • Variable speed: The saw features a variable speed control that allows you to adjust the speed of the blade to match the material you are cutting. This can help to prevent the blade from burning the material or causing tear-out.
  • Bevel adjustment: The saw has a bevel adjustment that allows you to make cuts at angles up to 45 degrees left or right. This makes it a versatile tool for a variety of woodworking projects.
  • Laser guide: The saw features a laser guide that projects a line onto the material you are cutting, making it easier to make accurate cuts.
  • Dust collection: The saw has a dust collection port that helps to keep your work area clean.

Cons:

  • Weight: The Skil 2712 MA is a relatively heavy saw, weighing in at 24 pounds. This can make it difficult to transport and use for extended periods of time.
  • No stand: The saw does not come with a stand, so you will need to purchase one separately.
  • Some users have reported that the laser guide is not very accurate.

User reviews:

Overall, the Skil 2712 MA has received positive reviews from users. Many users have praised the saw's power, accuracy, and versatility. However, some users have reported that the saw is a bit heavy and that the laser guide is not very accurate.

My thoughts:

The Skil 2712 MA is a powerful and versatile miter saw that is a good choice for both professional and DIY users. It has a powerful motor, variable speed control, bevel adjustment, laser guide, and dust collection port. However, it is a bit heavy and the laser guide is not very accurate. Overall, I think the Skil 2712 MA is a good value for the price.

Here are some additional thoughts on the Skil 2712 MA:

  • The saw is relatively easy to use, even for beginners.
  • The laser guide is a helpful feature, but it is not essential.
  • The dust collection port is effective at keeping your work area clean.
  • The saw is backed by a one-year warranty.

If you are looking for a powerful and versatile miter saw that is easy to use, the Skil 2712 MA is a good option to consider.

Skil 2712 MA Where To Buy

You can buy the Skil 2712 MA and spare parts from the following retailers:

  • Skil Direct: The official website of Skil power tools. They have the router in stock and sell it for $119.99. They also sell a variety of spare parts for the router. Image of Skil 2712 MA router
  • Walmart: Walmart sells the router for $129.99. They also have a few spare parts available for purchase. Image of Skil 2712 MA router on Walmart
  • Amazon: Amazon sells the router for $119.99. They have a wider selection of spare parts available than Walmart or Skil Direct. Image of Skil 2712 MA router on Amazon
  • Best Buy: Best Buy sells the router for $129.99. They have a limited selection of spare parts available. Image of Skil 2712 MA router on Best Buy
  • Lowe's: Lowe's does not currently have the router in stock. However, they do have a few spare parts available for purchase. Image of Skil 2712 MA router on Lowe's
  • eBay: eBay is a good option if you are looking for a used router or spare parts that are not available from other retailers. Image of Skil 2712 MA router on eBay

I hope this helps!

Skil 2712 MA Problems and Solutions

some common issues and problems with the SKIL 2712 MA drill and their solutions:

  • The drill won't turn on.
    • Make sure that the battery is properly inserted and charged.
    • Check the fuse in the drill. If it is blown, replace it.
    • If the drill still won't turn on, contact SKIL customer service.
  • The drill is not drilling properly.
    • Make sure that the drill bit is the correct size for the material you are drilling.
    • Check the chuck to make sure that it is tightened securely.
    • If the drill is still not drilling properly, contact SKIL customer service.
  • The drill is not screwing properly.
    • Make sure that the screw bit is the correct size for the screw you are using.
    • Check the chuck to make sure that it is tightened securely.
    • If the drill is still not screwing properly, contact SKIL customer service.
  • The drill is overheating.
    • Take a break and let the drill cool down.
    • Make sure that you are not using the drill on a high setting for too long.
    • If the drill continues to overheat, contact SKIL customer service.
  • The drill is making strange noises.
    • Stop using the drill and inspect it for any damage.
    • If you see any damage, contact SKIL customer service.
    • If you do not see any damage, try using the drill on a different setting. If the noise continues, contact SKIL customer service.

Here are some additional tips for troubleshooting common problems with the SKIL 2712 MA drill:

  • Check the user manual. The user manual may have troubleshooting tips specific to your drill.
  • Clean the drill. Accumulated dirt and debris can interfere with the drill's performance.
  • Lubricate the drill. The drill's moving parts need to be lubricated to prevent wear and tear.
  • Replace the battery. If the battery is old or damaged, it may not be able to power the drill properly.

If you have tried all of these troubleshooting tips and your drill is still not working properly, contact SKIL customer service for help.

Skil 2712 MA Manual

Skil 2712 MA Manual

Safety Information

  • Always wear safety glasses when using this tool.
  • Do not use this tool in wet or damp conditions.
  • Keep the work area clean and well-lit.
  • Do not overload the tool.
  • Use the correct drill bit for the job.
  • Do not force the tool.
  • Allow the tool to cool down before storing it.

Before Use

  • Read the entire manual carefully before using this tool.
  • Make sure the tool is in good working order.
  • Check the cord for any damage.
  • Inspect the drill bits for any damage.
  • Do not use the tool if it is damaged or malfunctioning.

Troubleshooting

  • If the tool does not work, check the battery.
  • If the battery is charged and the tool still does not work, contact customer service.

Maintenance

  • Clean the tool after each use.
  • Wipe off any dirt or debris with a damp cloth.
  • Do not use harsh chemicals or solvents to clean the tool.
  • Store the tool in a cool, dry place.

Warranty

This tool is warranted to be free from defects in material and workmanship for a period of two years from the date of purchase. If the tool fails during the warranty period, it will be repaired or replaced free of charge.

Contact Information

Additional Information

  • This tool is not intended for professional use.
  • It is designed for light-duty household use only.
  • Do not use this tool for any other purpose than what it is intended for.
  • By using this tool, you agree to the terms of the warranty.

Dated: 2023-06-27

Comments

Post a Comment

Popular posts from this blog

Unraveling Einhell Axxio 36/230 Q: From Full Specifications To Potential Issues

Image
Einhell AXXIO 36/230 Q Information The Einhell AXXIO 36/230 Q is a powerful cordless angle grinder that is perfect for a variety of cutting, grinding, and sanding applications. It is a member of the Power X-Change family, which means that it can use any of the 18 V Power X-Change batteries. This gives you the freedom to use the same battery for multiple tools, which can save you money in the long run. The AXXIO 36/230 Q is equipped with a brushless motor that provides more power and runtime than a traditional brushed motor. It also features a quick-release nut for tool-free disc changes, a rotating main handle for maximum flexibility, and a disc guard with quick adjustment. Here is a table of the full specifications of the Einhell AXXIO 36/230 Q:
Read more

Hikoki Dh36dma: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

Image
HiKOKI DH36DMA Information The HiKOKI DH36DMA is a 36V cordless SDS-max hammer drill that delivers the power and performance of a corded tool. It features a brushless motor for longer runtime and more durability, as well as a reactive force control (RFC) function that helps to prevent the tool from being swung out of control when encountering sudden impacts. The DH36DMA also has a low vibration handle that helps to reduce user fatigue, and it comes with a variety of features that make it a versatile tool for a variety of applications. Image: Specifications:
Read more

Mafell Uva 115 E: Top-notch Specifications, Comprehensive Comparisons, And Trusted Buying Sources

Image
Mafell UVA 115 E Information The Mafell UVA 115 E is a high-quality orbital sander that is designed for precision sanding in corners, on edges, and other difficult-to-reach areas. It features a powerful 230 V motor that delivers up to 24,000 orbits per minute, and a delta sanding pad that ensures a smooth, even finish. The UVA 115 E also has a number of features that make it easy to use and maintain, such as a dust extraction system that helps to keep the work area clean, and a mechanical clamp that holds the sanding paper in place. Image: Specifications:
Read more